Parent | Child | Previous | Next
 

Creating and Formatting an Embedded Browse

Description

Procedures for creating an embedded browse and then formatting it.

Procedure: Creating the Embedded Browse

The following procedure assumes that the developer has opened the form in the Form Editor. Follow these instructions to create an embedded browse similar to Object1.

  1. Sketch the embedded browse on the form.

  2. Select the "Vendor->Vendor_id" field and click '>'.

  3. Repeat for the "Vendor->Name", "Vendor->Phone", and "Vendor->Contact_name" fields.

  4. Click OK.

    Al Form Vendor Object1 Create

Procedure: Formatting the Embedded Browse

The following procedure assumes that the developer has opened the form in the Form Editor . Follow these instructions to format an embedded browse similar to Object1 .

  1. Double click the browse so that the dark outline appears.

    Al Form Vendor Object1 Select

  2. Position the cursor over the row separator until the special cursor appears, then drag the line until the row is the correct height.

    Al Form Vendor Object1 Row Height

  3. Position the cursor over the column separator until the special cursor appears, then drag the line until the column is the correct width.

    Al Form Vendor Object1 Column Width

  4. Click a cell in the Vendor_name column, right click and select Properties....

  5. Change the Column title field to "Name".

  6. Repeat for the other columns to give them appropriate names.

  7. Click OK.

    Al Form Vendor Object1 Change Column Name
You can also set the width of the column here by entering an inch value.

See Also